Power Supply / Other

The most widely used cable with 2.1mm straight barrel connector on each end and standard (center negative) polarity. Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more.

Pedals need clean, isolated power and Fender’s Engine Room™ LVL5 Power Supply is capable of the task. Featuring five ground isolated power outlets, each outlet is capable of 9Vdc at 500mA to keep your pedals performing at their peak. Works as a standalone

The Syntax Error takes your tones back to the dialup era, when video games were measured by their bits and telephones were wired to your wall. Inside, the primitive sounds of microchips await. It's time to blow the dust out of your cartridges and plug in

A cable with a 2.1mm right angle barrel and a 3.5mm right angle mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connection is compatible with older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and vinta

Pedals need clean isolated power and Fender’s Engine Room™ LVL8 Power Supply is capable of the task. Featuring eight ground isolated power outlets, (6) are capable of delivering 9Vdc at 500mA while (2) additional outlets provide switchable voltage (9v/12v

1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of

1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of

EC input and output with courtesy US standard outlet. 18 gauge wire handles up to 1250 Watts.

1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of

For pedals with higher voltage requirements, the Voltage Doubler cable will combine two 9V or 12V Pedal Power outputs to create a single 18V or 24V output. This cable features two BLACK 2.1mm barrel plugs to a single BLACK 2.1mm plug for use with standard

The D'Addario 9-Volt Power Adaptor works with pedals and other devices requiring 9-Volts to minimize the need to change batteries.

This is a pair of brackets designed to hold Pedal Power models to Dingbat pedalboards.